Panasonic KX-TDA100 Installing/Replacing the Power Supply Unit, Function, Safety Instructions

2.2 Installation of the Hybrid IP-PBX

2.2.4Installing/Replacing the Power Supply Unit

Function

PSU Type	Lower/Upper Input Voltage Range	Current	Input Frequency
PSU-S	Lower: 100 V AC to 130 V AC	1.4 A
(for KX-TDA100)
	Upper: 200 V AC to 240 V AC	0.8 A
PSU-M	Lower: 100 V AC to 130 V AC	2.5 A	50 Hz or 60 Hz
(for KX-TDA100/200)
	Upper: 200 V AC to 240 V AC	1.4 A
PSU-L	Lower: 100 V AC to 130 V AC	5.1 A
(for KX-TDA200)
	Upper: 200 V AC to 240 V AC	2.55 A

PSU-S

Battery Switch

Battery Connector

Power Switch

Earth Terminal

AC Inlet

PSU-M/PSU-L

Battery Switch

Battery Connector

Earth Terminal

Power Switch

AC Inlet

Accessories and User-supplied Items

Accessories (included): Screws × 4

User-supplied (not included): Earthing wire, Back-up Battery Cable (KX-A228 for PSU-S and PSU-M, or KX-A229 for PSU-L)

Notes

•For details about frame earth connection, refer to "2.2.5 Frame Earth Connection".

•For details about backup batteries connection, refer to "2.2.6 Backup Battery Connection".

Safety Instructions

Each PSU complies with Safety Class 1 of IEC60950, EN60950, UL60950,

CAN/CSA-C22.2 No.60950, and AS/NZS60950; therefore a protective earth connection exists between the mains outlet ground and the PSU case. To ensure the PBX chassis is safely grounded, it is essential that the PSU case be securely fastened to the PBX chassis with the 4 screws provided with each PSU.

When installing or replacing a PSU, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

1.Never install or replace a PSU during a lightning storm.

2.Never install or replace a PSU in wet locations.

44

Installation Manual