Panasonic KX-TDA100 Pin Assignments, LED Indications, RJ45 Connector for Trunk Use, Signal Name

										2.4 Information about the Trunk Cards
Pin Assignments
RJ45 Connector for Trunk Use
				No.		Signal Name			Level [V]	Function
		8		1		RX+			(+)	Receive data (+)
				2		RX-			(-)	Receive data (-)
			1	3		Reserved			–	–
				4		TX-			(-)	Transmit data (-)
				5		TX+			(+)	Transmit data (+)
				6-8		Reserved			–	–
RJ45 Connector for Extension Use
				No.		Signal Name			Level [V]	Function
		8		1		TX-			(-)	Transmit data (-)
				2		TX+			(+)	Transmit data (+)
			1	3		Reserved			–	–
				4		RX+			(+)	Receive data (+)
				5		RX-			(-)	Receive data (-)
				6-8		Reserved			–	–
LED Indications
	Indication				Colour		Description
	CARD STATUS				Green/Red		Card status indication
							•	OFF: Power Off
							• Green ON: Normal (all ports are idle)
							• Green Flashing (60 times per minute): Normal (a port is in use)
							• Red ON: Fault (includes reset)
							• Red Flashing (60 times per minute): Out of Service
	SYNC-ERR				Red		Non-synchronisation status indication
							•	OFF: Normal
							• ON: Out of synchronisation
	RAI				Red		RAI signal status indication
							•	OFF: Normal
							• ON: Alarm (Clock Slave)
							• Flashing (60 times per minute): Alarm (Clock Master)
	AIS				Red		AIS status indication
							•	OFF: Normal
							•	ON: Alarm

Installation Manual

99