Panasonic KX-TDA100 Specifications, General Description, Control Bus, Communication Bus, Psu-S

1.4 Specifications

1.4Specifications

1.4.1General Description

Control Bus		Original bus (16-bit, 8 MHz, 10 megabytes per second)
Communication Bus		H.100 bus conformity (1024 time slots)
Switching		Non-blocking
Power Input	PSU-S	100 V AC to 130 V AC, 1.4 A/200 V AC to 240 V AC, 0.8 A,
		50 Hz/60 Hz
	PSU-M	100 V AC to 130 V AC, 2.5 A/200 V AC to 240 V AC, 1.4 A,
		50 Hz/60 Hz
	PSU-L	100 V AC to 130 V AC, 5.1 A/200 V AC to 240 V AC, 2.55 A,
		50 Hz/60 Hz
External Battery		+36 V DC (+12 V DC × 3, recommended maximum capacity
		is 28 Ah)
Maximum Power Failure Tolerance		300 ms (without using backup batteries)
Memory Backup Duration		7 years
Dialling	Trunk	Dial Pulse (DP) 10 pps, 20 pps
		Tone (DTMF) Dialling
	Extension	Dial Pulse (DP) 10 pps, 20 pps
		Tone (DTMF) Dialling
Mode Conversion		DP-DTMF, DTMF-DP
Ring Frequency		20 Hz/25 Hz (selectable)
Trunk Loop Limit		1600 Ω maximum
Operating	Temperature	0 ˚C to 40 ˚C
Environment
	Humidity	10 % to 90 % (non-condensing)
Conference Call Trunk		From 10 × 3-party conference call to 4 × 8-party conference
		call
Music on Hold (MOH)		2 ports (Level Control: -11 dB to +11 dB in 1 dB steps)
		MOH1: External Music Source port
		MOH2: Selectable Internal/External Music Source port
Paging	Internal	Level Control: -15 dB to +6 dB in 3 dB steps
	External	2 ports (Volume Control: -15 dB to +15 dB in 1 dB steps)
Serial Interface Port	RS-232C	1 (maximum 115.2 kbps)
	USB	1

26

Installation Manual