Panasonic KX-TDA100 installation manual Installing the KX-TDA Maintenance Console

3.3 Installation of the KX-TDA Maintenance Console

Installing the KX-TDA Maintenance Console

Notes

•Make sure to install and use the latest version of the KX-TDA Maintenance Console.

•To install or uninstall the software on a PC running Windows 2000 Professional or Windows XP Professional, you must be logged in as a user in either the "Administrators" or "Power Users" group.

•To connect the PC to the Hybrid IP-PBX via USB, the KX-TDA USB driver must be installed. Follow the instructions of the wizard to install the KX-TDA USB driver. When the Hybrid IP-PBX is first connected to the PC via USB, you may be asked to select the appropriate USB driver. Browse for and select the KX-TDA USB driver that was installed previously.

1.Copy the setup file of the KX-TDA Maintenance Console to your PC. (Its icon is shown here, on the left.)

2.Double-click the setup file to run the installer.

3.Follow the on-screen instructions provided by the installation wizard.

Starting the KX-TDA Maintenance Console and Assigning the Basic Items (Quick Setup)

When you start the KX-TDA Maintenance Console with the Installer Level Programmer Code and connect to the Hybrid IP-PBX for the first time after initialisation (with the factory default setting), Quick Setup will launch automatically. During Quick Setup, you will set up the basic items. For details about the basic items, refer to "2.3.4 Quick Setup" in the Feature Guide.

1.Connect the PC to the Hybrid IP-PBX with a USB cable.

2.Start the KX-TDA Maintenance Console from the Start menu.

3."Information Before Programming" appears.

a.Carefully read this important additional information, which includes updates to this and other manuals.

b.Click [OK] to close this window.

4.Enter the Installer Level Programmer Code (default: INSTALLER), then click [OK].

The Programmer Code authorises different programming levels, and the Quick Setup is only available when you start the KX-TDA Maintenance Console with the Installer Level Programmer Code.

Note

There are 2 other Programmer Codes with limited authorisation: Administrator Level (default: ADMIN), and User Level (default: USER).

216 Installation Manual