Panasonic KX-TDA100 Backup Battery Connection, Backup Power Supply Duration, User-supplied Items

2.2 Installation of the Hybrid IP-PBX

2.2.6Backup Battery Connection

The backup batteries and Back-up Battery Cable provide a backup power supply to allow full use of the Hybrid IP-PBX in the event of a power failure. In case of power failure, the backup batteries automatically maintain the power to the Hybrid IP-PBX without interruption.

User-supplied Items

•Backup Batteries: VRLA (Valve Regulated Lead Acid) 12 V DC × 3

•Back-up Battery Cable: KX-A228 (for PSU-S and PSU-M) or KX-A229 (for PSU-L)

CAUTION

•Make sure that the Back-up Battery Cable is securely fastened to both the backup batteries and the Hybrid IP-PBX.

•Be sure to comply with applicable local regulations (e.g., laws, guidelines).

•Make sure that the polarities of the backup batteries and wiring are correct.

•Make sure that you do not short the backup batteries or cables.

•There is a danger of explosion if backup batteries are incorrectly replaced. Replace only with the same or equivalent type recommended by the battery manufacturer. Dispose of used batteries according to the manufacturer's instructions.

•Use the correct type of Back-up Battery Cable for the PSU.

Notes

•Turn on the battery switch on the PSU only after the installation of the Hybrid IP-PBX is finished and AC power is available.

•The recommended maximum capacity is 28 Ah, to maintain effective battery charge.

•Make sure that the type and capacity of the 3 backup batteries are identical.

•The Back-up Battery Cable should not be exposed to direct sunlight. Keep the Back-up Battery Cable and the backup batteries away from heating appliances and fire. Place the backup batteries in a ventilated place.

•For details about the backup batteries, refer to the manual for the batteries.

Backup Power Supply Duration

The length of time that backup batteries can power the Hybrid IP-PBX varies depending on the total load figure. For how to calculate the load figure from the connected items, refer to "Load Figure Calculation".

Examples

Battery Capacity	Total Load Figure	Backup Power Supply Duration*1
	64	11 h
28 Ah	128	5.5 h
	512	3 h

*1 The duration may vary depending on the conditions.

Installation Manual

49