Panasonic KX-TDA100 Site Survey, Scan Data No, Testing the Radio Signal Strength

2.9 Connection of 2.4 GHz Portable Stations

2.9.5Site Survey

The PS has a Radio Signal Test mode that monitors the state of the radio link to the CS. After installing the CSs temporarily, set the PS to Radio Signal Test mode and measure each CS coverage area. Then, record the results on the map of the installation site.

Testing the Radio Signal Strength

Note

Display prompts for the site survey are only available in English.

1.Enter Radio Signal Test mode.

Using the KX-TD7680

1	9	0	CS No.
Press 1, 9, and POWER			1 to 9
for more than 2 seconds.

To store the scan data

Scan Data No.

0 to 9

Using the KX-TD7690

1	9	0	CS No.
Press 1, 9, and POWER			1 to 9
for more than 2 seconds.

To store the scan data

Scan Data No.

0 to 9

Notes

Display example:

<< SEARCHING >>

Display example:

<< SEARCHING >>

CS NO.1 LEVEL:12*1 SAVE:0123456789*2

CS NO.1 LEVEL:12*1 SAVE:0123456789*2

*1: CS number and radio signal strength level.

*2: Scan data (test result) number. Empty memory space will be indicated by a number; stored memory space will be indicated by a "-".

Installation Manual 183