Panasonic KX-TDA100 Pager, PC/Printer via RS-232C, Pin Assignments, Connection Charts, Function

2.11 Connection of Peripherals

Pager

Up to 2 paging devices (user-supplied) can be connected to the Hybrid IP-PBX.

CAUTION

External Paging Jacks are SELV ports and should only be connected to approved SELV devices, or in Australia, via the Line Isolation Unit with the Telecommunications Compliance Label.

PC/Printer (via RS-232C)

The Hybrid IP-PBX is equipped with an RS-232C interface. This interface provides communication between the Hybrid IP-PBX and the user-supplied devices such as PC or line printers. The RS-232C port is used for system programming, SMDR, diagnostics and external system database storage (save/load) functions.

Note

Use an RS-232C cross cable for connection between the Hybrid IP-PBX and PC.

Pin Assignments

Circuit Type

		No.	Signal Name	Function	EIA	CCITT
6	1	2	RD (RXD)	Receive Data	BB	104
		3	SD (TXD)	Transmit Data	BA	103
		4	ER (DTR)	Data Terminal Ready	CD	108.2
9	5	5	SG	Signal Ground	AB	102
		6	DR (DSR)	Data Set Ready	CC	107
		7	RS (RTS)	Request To Send	CA	105
		8	CS (CTS)	Clear To Send	CB	106

Connection Charts

For connecting a printer/PC with a 9-pin RS-232C connector

Hybrid IP-PBX

Circuit Type	Signal	Pin No.
(EIA)	Name
BB	RD (RXD)	2
BA	SD (TXD)	3
CD	ER (DTR)	4
AB	SG	5
CC	DR (DSR)	6
CA	RS (RTS)	7
CB	CS (CTS)	8

Printer/PC

Pin No.	Signal	Circuit Type
	Name	(EIA)
2	RD (RXD)	BB
3	SD (TXD)	BA
4	ER (DTR)	CD
5	SG	AB
6	DR (DSR)	CC
7	RS (RTS)	CA
8	CS (CTS)	CB

202 Installation Manual