![](/images/new-backgrounds/1147016/147016293x1.webp)
Chapter 2 Avaya P460 CLI Commands
Example:
P460-1> show ip route
Destination MaskGateway
2.2.2.2255.255.255.01.1.1.2
2.2.2.2255.255.0.01.1.1.3
0.0.0.00.0.0.00.0.0.0
0.0.0.00.0.0.00.0.0.0
0.0.0.00.0.0.00.0.0.0
0.0.0.00.0.0.00.0.0.0
0.0.0.00.0.0.00.0.0.0
0.0.0.00.0.0.00.0.0.0
0.0.0.00.0.0.00.0.0.0
0.0.0.00.0.0.00.0.0.0
0.0.0.00.0.0.00.0.0.0
show ip route (Layer 3)
User level: read-only, read-write, admin.
Use the show ip route command to display information about the IP unicast routing table.
The syntax for this command is:
show ip route
Router-1> show ip route
Network | Mask | Interface | Source | |
149.49.77.0 | 255.255.255.0 | 149.49.77.70 | inband | LOCAL |
0.0.0.0 | 0.0.0.0 | 149.49.77.1 | inband | STATIC |
show ip route best-match
User level: read-only, read-write, admin.
Use the show ip route
The syntax for this command is:
show ip route best-match <dst addr>
dst addr | IP address |
Avaya P460 Reference Guide | 137 |