Chapter 2 Avaya P460 CLI Commands

The syntax for this command is:

session [[module_number>] {switch router}]

module

The Supervisor module number (1...2).

switchrouter

• The entity to which you want to open a

(Optional)

session.

 

• If you do not specify this parameter, you

 

will get the default entity of the specific

 

module:

 

• switch - Layer 2 entity of the module.

 

• router - Routing entity

Example:

 

P460-1>session router

Router-1 (super) #

The security level stays the same when you use the session command.

set allowed managers

User level: read-write, admin.

Use the set allowed managers command to enables or disable the Allowed Managers feature.

When this feature is enabled, only those stations whose IP addresses are listed in the Allowed Managers table can access the device over Telnet, SNMP, or HTTP.

The syntax for this command is:

set allowed managers [enableddisabled]

Example:

P460-1(super)#set allowed managers enabled

Managers are enabled

Avaya P460 Reference Guide

71

Page 81
Image 81
Cambridge SoundWorks manual P460-1session router, Set allowed managers enableddisabled