Chapter 2 Avaya P460 CLI Commands
show rmon history
User level: read-only, read-write, admin.
Use the show rmon history command to display the most recent RMON history log for a given History Index. The history index is defined using the rmon history command on 69 or using an RMON management tool.
The syntax for this command is:
show rmon history [<History Index>]
History Index | History index defined using rmon history command or |
| RMON management tool |
Example: |
|
P460-1> show rmon history 1026
history
Entry 1026 is active, owned by amir Monitors ifEntry.1.1026 every 30 seconds Requested # of time intervals, ie buckets, is 20 Granted # of time intervals, ie buckets, is 20 Sample # 1 began measuring at 2:53:9
Received 62545 octets, 642 packets,
391 broadcast and 145 multicast packets,
0 undersize and 0 oversize packets,
0 fragments and 0 jabbers,
0 CRC alignment errors and 0 collisions,
#of dropped packet events (due to a lack of resources): 0 Network utilization is estimated at 0
show rmon statistics
User level: read-only, read-write, admin.
Use the show rmon statistics command to show the Received Packet RMON statistics counters for a certain interface number according to the
The syntax for this command is:
show rmon statistics <module/port>
module/port | Range of ports |
168 | Avaya P460 Reference Guide |
