Chapter 2 Avaya P460 CLI Commands
Example:
Session hostname is ‘P460’
P460-1# hostname “gregory”
If you wish to enter a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.
hostname (Layer 3)
User level: read-write, admin.
Changes the system prompt used for the router. This command does not change the system prompt of the switch. To change the system prompt of the switch, use the host name command in the Layer 2 tree.
The syntax for this command is:
[no] hostname [<hostname_string>]
hostname_string The string to be used as the hostname (up to 20 characters). If you do not enter a string, the current hostname is displayed.
Example:
Router-1> hostname Marketing
If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.
interface
User level: read-write, admin.
You can only access this command in configure mode.
Type configure at the command prompt to enter configure mode if necessary.
Use the interface command to create and enter the Interface Configuration Mode.
Use the no interface command to delete a specific IP interface.
30 | Avaya P460 Reference Guide |
