Chapter 2 Avaya P460 CLI Commands
Example:
P460-1# set port vlan-binding-mode 5/5-9 static
Set Port vlan binding method:5/5
Set Port vlan binding method:5/6
Set Port vlan binding method:5/7
Set Port vlan binding method:5/8
Set Port vlan binding method:5/9
set ppp authentication incoming
User level: read-write, admin.
Use the set ppp authentication command to define the authentication method used for a PPP server or client session.
The syntax for this command is:
set ppp authentication incoming {papchapnone}
pap | PAP authentication method |
chap | CHAP authentication method |
none | No authentication |
Example: |
|
P460-1# set ppp authentication incoming chap
PPP requires CHAP authentication for incoming sessions.
set ppp baud-rate
User level: read-write, admin.
Defines the baud rate used in PPP sessions.
Note: The peer baud rate must be set at the same value as the host.
The syntax for this command is:
set ppp baud-rate <96001920038400>
Avaya P460 Reference Guide | 101 |