Cambridge SoundWorks manual Set time server ip address, P460-1#set time server

Chapter 2 Avaya P460 CLI Commands

set time server

User level: read-write, admin.

Use the set time server command to set the TIME server address.

The syntax for this command is:

set time server <ip address>

ip address IP address of the TIME server.

Example:

P460-1#set time server 192.49.53.68

The Server Ip has been set to 192.49.53.68

set timezone

User level: read-write, admin.

Use the set timezone command to assign a timezone name and sets the time difference of the device relative to the Coordinated Universal Time (UTC / GMT).

The minutes parameter can only be set to 30.

The syntax for this command is:

set timezone <zone-name> [-]<hours>[:30]

zone-name	Three-character name of time zone, for example, EST, GMT
hours	The difference between the time zone and GMT
Example:

P460-1#set timezone EST -5

Timezone set to “EST”, offset from UTC is -5 hours.

set trunk

User level: read-write, admin.

Use the set trunk command to configure the VLAN tagging mode of a port.

set trunk <module/port> {offdot1q}

module Number of the module (3-6).

116 Avaya P460 Reference Guide