Chapter 2 Avaya P460 CLI Commands

Example:

P460-1(super)#no username john

User account removed.

If you wish to delete a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.

You cannot delete the default user account “root”.

nvram initialize

User level: read-write, admin.

Use the nvram initialize command to reset the configuration parameters to their factory defaults on the Active and Standby Supervisor modules.

The syntax for this command is:

nvram initialize {switch all}

switch

Resets all the switch information (Layer 2 only).

all

Resets all parameters including routing parameters in the

 

switch.

Example:

 

P460-1#nvram initialize

This command will restore factory defaults, and can disconnect your telnet session

***Reset *** - do you want to continue (Y/N)? y Connection closed by foreign host

The nvram initialize command does not alter the Active/Standby status of the Supervisor modules.

62

Avaya P460 Reference Guide

Page 72
Image 72
Cambridge SoundWorks manual P460-1super#no username john, Nvram initialize switch all, P460-1#nvram initialize