Chapter 2 Avaya P460 CLI Commands

show ip ospf neighbor

User level: read-only, read-write, admin.

Displays OSPF-neighbor information on a per-interface basis.

The syntax for this command is: show ip ospf neighbor

[<interface-name>] [<neighbor-id>]

interface-name

The OSPF interface name.

neighbor-id

Neighbor ID.

Example:

 

Router-1>show ip ospf neighbor

If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.

show ip protocols

User level: read-only, read-write, admin.

Use the show ip protocols command to display the IP routing protocol process parameters and statistics.

The syntax for this command is:

show ip protocols [<protocol>]

protocol

RIP OSPF.

(Optional)

 

Example:

Router-1 (super) # show ip protocols Routing Protocol is "rip"

Sending updates every 30 seconds, next due in 0 seconds Invalid after 180 seconds, flushd after 300 Redistributing: rip

Default version control: rip version 1

Interface

Version Key

Routing

for Networks:

 

Routing

Information Sources:

Gateway

Last Update

Avaya P460 Reference Guide

135

Page 145
Image 145
Cambridge SoundWorks P460 manual Show ip ospf neighbor, Router-1show ip ospf neighbor, Show ip protocols