Chapter 2 Avaya P460 CLI Commands

Use the no ip vrrp override addr owner command to discard these packets.

The syntax for this command is:

[no] ip vrrp <vr-id>override addr owner

vr-id

Virtual Router ID (1-255)

Example:

Router-1(configure-if:marketing) # ip vrrp 1 override addr

owner

Done!

ip vrrp preempt

User level: read-write, admin.

You can only access this command in Interface mode.

Type interface [name] at the command prompt to enter Interface mode if necessary.

Use the ip vrrp preempt command to configure the router to preempt a lower priority master for the virtual router ID.

Use the no ip vrrp preempt command to disable preemption for the virtual router instance.

By default, preemption is enabled.

The syntax for this command is: [no] ip vrrp <vr-id>preempt

vr-id

Virtual Router ID (1-255)

Example:

Router-1(configure-if:marketing) # ip vrrp 1 preempt

Done!

ip vrrp primary

User level: read-write, admin.

You can only access this command in Interface mode.

Type interface [name] at the command prompt to enter Interface mode if necessary.

56

Avaya P460 Reference Guide

Page 66
Image 66
Cambridge SoundWorks P460 manual No ip vrrp vr-idoverride addr owner, Owner, Ip vrrp preempt, Ip vrrp primary