Cambridge SoundWorks manual Entering the CLI, Entering the Technician Level, P460-1help show

Chapter 1 Using the CLI

Entering the CLI

To enter the CLI, enter your username and password. Your access level is indicated in the prompt as follows:

The User level prompt is shown below:

P460 >

The Privileged level prompt is shown below:

P460-1#

The Configure level prompt for Layer 3 configuration is shown below:

P460(configure)#

The Supervisor level prompt is shown below:

P460(super)#

Entering the Technician Level

This level is can only be accessed from the Privileged and Supervisor levels not from the User level.

This feature is for use by Avaya Technical Support only.

Getting Help

On-line help may be obtained at any time by typing a question mark (?), or the word help on the command line or by pressing the F1 key. To obtain help for a specific command, type the command followed by a space and a question mark.

Example:

P460-1> show ?

P460-1>help show

Command Syntax

Commands are not case-sensitive. That is, uppercase and lowercase characters may be interchanged freely.

Command Abbreviations

All commands and parameters in the CLI can be truncated to an abbreviation of any length, as long as the abbreviation is not ambiguous. For example, version can be abbreviated ver.

For ambiguous commands, type the beginning letters on the command line and then use the TAB key to toggle through all the possible commands beginning with these letters.

10 Avaya P460 Reference Guide