Chapter 2 Avaya P460 CLI Commands
Normally, the UDP port number should be set to its default value of 1812. Some early implementations of the RADIUS server used port number 1645.
The syntax for this command is:
set radius authentication udp-port <number>
Example:
P460-1(super)# set radius authentication udp-port number 1645
set slot power
User level: read-write, admin.
Use the set slot power command to power up or power down a slot. If there is a module in the slot, then the command will reset the device.
The syntax for this command is:
set slot power [Mod {UpDown}]
Mod | Module number |
Up | Power up the module |
Down | Power down the module |
Example 1 – if the slot is empty:
P460-1> set slot power 4 up
slot 4 power is enabled
P460-1> set slot power 4 down
slot 4 power is disabled
108 | Avaya P460 Reference Guide |
