Cambridge SoundWorks P460 manual Set port redundancy-intervals

Chapter 2 Avaya P460 CLI Commands

there is no redundancy scheme already defined on any of the links.

The syntax for this command is:

set port redundancy <module>/<prim_port> <module>/ <second_port> {on/off} [<redundancy_name>]

prim_port	Primary port of the redundancy scheme
second_port	Secondary port of the redundancy scheme
redundancy_name	Name for the redundancy scheme
(Optional)
Example:

P460-1#set port redundancy 3/7 4/12 on red1 red1: Port 2/12 is redundant to port 1/7.

Port redundancy is active - entry is effective immediately

If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.

set port redundancy-intervals

User level: read-write, admin.

Use the set port redundancy-intervals command to configures the two time constants that determine redundancy switchover parameters:

•“Min Time-between-switchovers” is the minimum interval between switchover of each pair.

•“Switchback-interval” is the period the primary port link has to be “up” before the system switches back.

If the switchback interval is zero, the system never switches back. If it is one, switchback occurs immediately after the primary port link returns.

The syntax for this command is:

set port redundancy-intervals<min-time-between-switchovers> <switchback-interval> none

min-time-between-switchovers The minimum time between redundancy switchovers for each pair (in milliseconds).

Avaya P460 Reference Guide 95