Chapter 2 Avaya P460 CLI Commands
When adding a port to an existing LAG, type the same LAG name, otherwise you will create a new LAG.
The syntax for this command is:
set port channel <port_list> {value} [<name>]
port_list | A list of ports to be aggregated in the format module/port |
value | on or off |
name | Channel name |
(Optional) |
|
If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.
Example:
P460-1# set port channel 4/6,18 on server2
Port 4/6 channel mode set to on
Port 4/18 was added to channel
set port classification
User level: read-write, admin.
Use the set port classification command to set the port classification to either regular or valuable. Any change in the Spanning Tree state from Forwarding for a valuable port will erase all learnt MAC addresses in the switch.
The syntax for this command is:
set port classification [module/port] {regular valuable}
module port | module/port range |
regular valuable | port classification |
Example: |
|
P460-1# set port classification 2/19 valuable
Port 2/19 classification has been changed.
86 | Avaya P460 Reference Guide |