Chapter 2 Avaya P460 CLI Commands

set arp-tx-interval

User level: read-write, admin.

Sets the keep-alive frames sending interval. Setting the interval to 0 disables the transmission of the keep-alive frames.

The syntax for this command is:

set arp-tx-interval<inbandoutband> <value>

inbandoutband

Inband – inband interface

 

Outband – outband interface

value

The interval in seconds. (0-3600)

Example:

P460-1#set arp-tx-interval 15

ARP tx interval was set to 15 seconds.

set boot bank

User level: read-write, admin.

Use the set boot bank command to set the system boot bank (for the active Supervisor Module).

The syntax for this command is:

set boot bank {value}

value

bank-a to set the boot bank to A

 

bank-b to set the boot bank to B

Example:

P460-1#set boot bank A

boot bank is A

set broadcast storm control

User level: read-write, admin.

Use the set broadcast storm control command to enable or disable broadcast storm control.

Avaya P460 Reference Guide

73

Page 83
Image 83
Cambridge SoundWorks manual P460-1#set arp-tx-interval, Set boot bank value, P460-1#set boot bank a