Cambridge SoundWorks P460 Rmon alarm, Possible parameters are Rising, Falling, risingOrfalling

Chapter 2 Avaya P460 CLI Commands

rmon alarm

User level: read-write, admin.

Use the rmon alarm command to create a new RMON alarm entry.

The syntax for this command is:

rmon alarm <Alarm Number> <variable> <interval> <sampletype> rising-threshold<rising threshold> <rising event> falling- threshold <falling threshold> <falling event> <startup alarm> <owner>

alarm number	This is the alarm index number of this entry (it is advisable to
	use the same interface number as your alarm index number.)
variable	This is the MIB variable which will be sampled by the alarm
	entry.
interval	The interval between 2 samples.
sample type	This can be set to either delta (the difference between 2
	samples) or an absolute value.
rising threshold	This sets the upper threshold for the alarm entry.
rising event	The RMON event entry that will be notified if the upper
	threshold is passed.
falling	This sets the lower threshold for the alarm entry.
threshold
falling event	The RMON event entry that will be notified if the lower
	threshold is passed.
startup alarm	The instances in which the alarm will be activated. The
	possible parameters are: Rising, Falling, risingOrfalling.
owner	Owner name string.
Example:

P460-1#rmon alarm 1026 1.3.6.1.2.1.16.1.1.1.5.1026 60 delta rising-threshold 10000 1054 falling-threshold 10 1054 risingOrFalling gregory

alarm 1026 was created successfully

Avaya P460 Reference Guide 67