Chapter 2 Avaya P460 CLI Commands
clear dynamic vlans
User level: read-write, admin.
Use the clear dynamic vlans command to clear dynamically learned VLANs. Only the VLANs learned by the switch from incoming traffic are cleared using this command.
The syntax for this command is:
clear dynamic vlans
Example:
P460-1# clear dynamic vlans
This command will delete all the vlans that were dynamically learned by the device - do you want to continue (Y/N)? y
Dynamic vlans were deleted from device tables
clear event-log
User level: read-write, admin.
Use the clear
The syntax for this command is:
clear
spv_num | Number of Supervisor Module (1...2) |
(Optional) |
|
Example:
P460-1# clear event-log
*** Clearing the reset file ***
- do you want to continue (Y/N)? y
clear interface
User level: read-write, admin.
Use the clear interface command to clear the inband or outband interface from the NVRAM.
Avaya P460 Reference Guide | 17 |
