Chapter 2 Avaya P460 CLI Commands
set ppp incoming timeout
User level: read-write, admin.
Use the set ppp incoming timeout command to set the number of minutes until the system automatically disconnects an idle PPP incoming session.
The syntax for this command is:
set ppp incoming timeout <time>
time | The timeout in minutes |
Example:
P460-1# set ppp incoming timeout 15
PPPincoming session will automatically disconnect after 15 minutes of idle time
set qos dscp-agg-index
User level: read-write, admin.
You can only access this command in Configure mode.
Type configure at the command prompt to enter Configure mode if necessary.
Use the set qos
The syntax for this command is:
set qos dscp-agg-index <dscp> <agg-index>
dscp1 | dscp entry |
aggregate index | |
Example: |
|
|
|
set qos | |
|
|
set qos dscp-cos-map
User level: read-write, admin.
You can only access this command in Configure mode.
Type configure at the command prompt to enter Configure mode if
Avaya P460 Reference Guide | 103 |
