Chapter 2 Avaya P460 CLI Commands
Example:
Done!
ip route
User level: read-write, admin.
You can only access this command in configure mode.
Type configure at the command prompt to enter configure mode.
Use the ip route command to establish a static route.
Use the no ip route command to remove a static route.
The syntax for this command is:
[no] ip route
The IP address of the network | |
mask | Mask of the static route |
The next hop address in the network | |
cost | The path cost. The default is 1 |
preference | Preference, either High or Low. Default is Low. |
Example:
To define the router 192.168.33.38 as the next hop for the network 192.168.33.0 with mask 255.255.255.0:
Router-1(configure)# ip route 192.168.33.0 255.255.255.0 10.10.10.10
ip routing
User level: read-write, admin.
You can only access this command in configure mode.
Type configure at the command prompt to enter configure mode.
Avaya P460 Reference Guide | 51 |
