Chapter 2 Avaya P460 CLI Commands

clear arp-cache

User level: read-write, admin.

You can only access this command in configure mode.

Type configure at the command prompt to enter configure mode.

Use the clear arp-cachecommand to delete dynamic entries from the ARP cache and the IP route cache.

The syntax for this command is:

clear arp cache[<vlan><ip addr>[<mask>]]

vlan

VLAN string (up to 16 characters

ip addr

IP address

mask

IP mask

Example:

 

Router-1(configure)# clear arp-cache

Flushing all arp entries

Flushed 100 ARP entries

Done!

clear cam

User level: read-write, admin.

Use the clear cam command to delete all entries from the CAM table.

The syntax for this command is:

clear cam

Example:

P460-1#clear cam

CAM table cleared.

16

Avaya P460 Reference Guide

Page 26
Image 26
Cambridge SoundWorks manual Clear arp-cache, Clear cam, P460-1#clear cam