Connections
Caution
•Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting cables. Also, read the manual of the equipment to be connected.
•Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables connected to the input and output terminals may cause malfunctions and the other problems.
3 |
1
2
4 | 5 | 6 | 7 | 8 | 9 |
For power outlet 
When the
16
18
10 | 11 | 12 | 13 | 14 15 | 17 | 19 |
TIPS
1.AC input terminal
2.Power cord (Supplied)
3.USB cable
4.PC/AV HDMI input terminal
5.PC
6.Audio input terminal
7.Audio output terminals
8.RS-232C output terminal
9.
When the PN-ZB01 (optional) is attached 10. PC/AV DVI-D input terminal
11. PC/AV DVI-D output terminal
12. LAN terminal
13. External speaker terminals
14. Audio 1 input terminals
15. Audio 2 input terminals
16. PC RGB input terminals
17. AV component input terminals
18. AV video input terminal
19. AV S-video input terminal
•Set the audio input terminal used for each input mode in AUDIO SELECT on the OPTION menu. The factory settings are shown below.
Input mode | Audio input terminal (Factory setting) | |
PC | Audio input terminal | |
AV | Audio1 input terminal | |
AV component, | Audio2 input terminal | |
AV | ||
| ||
PC HDMI, AV HDMI | PC/AV HDMI input terminal |
•When connecting the external speaker, attach the speaker cable core (included with the
•To use the touch panel, the touch panel must be connected to a computer, and the touch panel driver and Pen Software must be installed on the computer from the provided
To connect the touch panel and install the touch panel driver, see the Touch Panel Driver Operation Manual.
To install the Pen Software, see the Pen Software Operation Manual.
•HDMI, the HDMI logo and
E6
