Chapter 2 Avaya P460 CLI Commands
The syntax for this command is:
disable interface [outband inband]
outband | Disables the outband interface |
inband | Disables the inband interface |
Example: |
|
P460-1# disable interface outband
You must reset the device in order for the change to take effect.
enable interface
User level: read-write, admin.
Use the enable interface command to enable the inband and outband interfaces.
The syntax for this command is:
enable interface {outband inband}
outband | Enables the outband interface |
inband | Enables the inband interface |
Example: |
|
*** Reset *** - do you want to continue (Y/N)? Y
Attaching network interface lo0... done.
Welcome to P460
SW version 1.0.1
Login:
28 | Avaya P460 Reference Guide |