Chapter 2 Avaya P460 CLI Commands

The syntax for this command is:

set broadcast storm control <enabledisable>

enable

Enable broadcast storm control

disable

Disable broadcast storm control

Example:

 

P460-1#set broadcast storm enable

Done!

set broadcast storm control threshold

User level: read-write, admin.

Use the set broadcast storm control threshold command to set the broadcast storm control threshold.

The syntax for this command is:

set broadcast storm control threshold <threshold>

threshold

In pps (packets per second) from 10 to 144,000 pps

 

The default value is 500

Example:

P460-1#set broadcast storm control threshold 1000

Done!

set device-mode

User level: read-write, admin.

Use the set device-modecommand to set the switch mode – Layer 2 or Router (Layers 2 and 3).

74

Avaya P460 Reference Guide

Page 84
Image 84
Cambridge SoundWorks manual Set broadcast storm control enabledisable, P460-1#set broadcast storm enable