Cambridge SoundWorks P460 manual Ip ospf dead-interval, No ip ospf dead-interval seconds

Chapter 2 Avaya P460 CLI Commands

ip ospf dead-interval

User level: read-write, admin.

You can only access this command in Interface mode.

Type interface [name] at the command prompt to enter Interface mode if necessary.

Use the ip ospf dead-intervalcommand to configure the interval before declaring the neighbor as dead.

Use no ospf dead-intervalto set the dead-interval to its default value of 40.

The syntax for this command is:

[no] ip ospf dead-interval <seconds>

seconds Time in seconds (integer value)

Example:

Router-1(configure-if:marketing) # ip ospf dead-interval 15

ip ospf hello-interval

User level: read-write, admin.

You can only access this command in Interface mode.

Type interface [name] at the command prompt to enter Interface mode if necessary.

Use this command to specify the time interval between hello's the router sends.

Use no ip ospf hello-intervalto set the hello-interval to its default.

The default is 10.

The syntax for this command is:

[no] ip ospf hello-interval <seconds>

secondsinteger

Example:

Router-1(configure-if:marketing) # ip ospf hello-interval 5

Done!

44 Avaya P460 Reference Guide