Cambridge SoundWorks P460 manual Command, Copy l2-config tftp filename ip

Chapter 2 Avaya P460 CLI Commands

If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.

configure

User level: read-write, admin.

Use the configure command to enter configure mode.

The syntax for this command is:

command

Example:

P460-1(super)# configure

P460-1(configure)#

copy l2-config tftp

User level: read-write, admin.

Use the copy l2-config tftp command to upload the Layer 2 parameters from the current NVRAM running configuration to a file via TFTP.

To use this command, you need to have an active tftp server, and to create a file into which to download the data.

If Avaya MultiService Network Manager is running, you do not require an additional TFTP server.

The syntax for this command is:

copy l2-config tftp <filename> <ip>

filename	file name (including full path)
ip	IP address of the host
Example:

P460-1#copy l2-config tftp c:\p460\config 149.49.152.36

copy tftp EW_archive

User level: read-write, admin.

Use the copy tftp EW-archivecommand to download the P460 Manager application into the switch via TFTP.

Avaya P460 Reference Guide 23