Cambridge SoundWorks P460 manual Ip vrrp timer, Line

Chapter 2 Avaya P460 CLI Commands

Example:

To set the priority value for virtual router 1 to 10:

Router-1(configure-if:marketing) # ip vrrp 1 priority 10

Done!

Example:

To set the virtual router simple password for virtual router 1 to abcd:

Router-1(configure-if:marketing) # ip vrrp 1 auth-key abcd

Done!

ip vrrp timer

User level: read-write, admin.

You can only access this command in Interface mode.

Type interface [name] at the command prompt to enter Interface mode if necessary.

Use the ip vrrp timer command to set the virtual router advertisement timer value (in seconds) for the virtual router ID.

Use no ip vrrp timer command to restore the default value.

The syntax for this command is: [no] ip vrrp <vr-id>timer <value>

vr-id	Virtual Router ID (1-255)
value	The advertisement transmit time (seconds).

Example:

To set the virtual router advertisement timer value for virtual router 3 to 2:

Router-1(configure-if:marketing) # ip vrrp 3 timer 2

Done!

line

You can only access this command from the banner or post-login banner context.

Use the line command to add a line to the banner or post-login banner message.

58 Avaya P460 Reference Guide