Chapter 2 Avaya P460 CLI Commands
ip proxy-arp
User level: read-write, admin.
You can only access this command in interface mode.
Type interface [name] at the command prompt to enter interface mode.
Use the ip
Use the no ip
The syntax for this command is:
[no] ip proxy-arp
Example:
To disable proxy ARP on interface marketing:
ip redirect
User level: read-write, admin.
You can only access this command in interface mode.
Type interface [name] at the command prompt to enter interface mode if necessary.
Use the ip redirect command to enables the sending of redirect messages on the interface.
Use the no ip redirect command to disable the redirect messages. By default, sending of redirect messages on the interface is enabled.
The syntax for this command is:
[no] ip redirect
Example:
ip rip authentication key
User level: read-write, admin.
You can only access this command in interface mode.
Type interface [name] at the command prompt to enter interface mode if necessary.
Use the ip rip authentication key command to set the authentication string used on the interface.
46 | Avaya P460 Reference Guide |
