WebView Switches
SNTP Tab - Authentication
The Authentication screen lists the keys used to authenticate the SNTP server.
SNTP Authentication. Enable or disable authentication of an SNTP session between the Switch and an SNTP server.
Click the Submit button to save your change.
Encryption Key ID. Displayed here is the encryption key used to authenticate the SNTP server and Switch.
Authentication Key. This is the key used for authentication.
Trusted Key. This indicates if there is an encryption key used (unicast/anycast) or elected (broadcast) to authenticate the SNTP server.
To add an entry, click the paper and pencil icon. On the new screen that appears, you can configure its settings. To modify the settings of an entry, click its pencil icon. On the new screen that appears, you can modify its settings.
Encryption Key ID. Enter the encryption key used to authenticate the SNTP server and Switch.
Authentication Key. Enter the key used for authentication.
Trusted Key. If there is an encryption key used (unicast/anycast) or elected (broadcast) to authenticate the SNTP server, then click the checkbox.
Click the Submit button to save your changes.
Chapter 5: Using the
Figure
55
SNTP Tab - Authentication
