WebView Switches
Security Tab - Local Users/System Password
This screen will appear as Local Users for those using a Gigabit Ethernet Switch and as System Password for those using a Fast Ethernet Switch.
This screen allows you to change the password for the Switch. To modify a user’s Password information, click the Edit icon next to the user’s name to open the edit screen. From this screen, you can edit the following fields:
User Name. This is the name of the administrator presently logged into the Switch’s
Password. Enter a new password here. Passwords can be no longer than 20 alphanumeric characters long.
Confirm Password.
Click the Submit button to save your changes.
To remove a user’s password information, click the Remove icon, which appears as a red X, next to their name.
To create a user’s password, click the pen and paper icon above the Edit and Remove icons and add the information as above.
Figure
Figure
Security Tab - 802.1x Users
The 802.1x Users screen allows you to enable
Port Based Network Access Control. Enable or disable
Authentication Method. Select the authentication method you want to use, RADIUS, None; RADIUS; or None.
For the RADIUS, None method, port authentication is performed first via RADIUS (Remote Authentication Dial InFigure
failure occurs, the port remains unauthorized and access is not granted. If you want the authentication to occur at the RADIUS server, select RADIUS. If you do not want to use an authentication method, then select None.
Click the Submit button to save your changes.
Chapter 5: Using the | 40 |
Security Tab - Local Users/System Password