WebView Switches
Security Tab for Other Switches - ACL
The ACL screen lists the access profiles and allows you to configure access profiles for the Switch. Access Profile. This is the name of the access profile.
Activated. You can activate an access profile by selecting the radio button. You can deactivate an access profile by deselecting the radio button.
If you want to delete a current access profile, then select the access profile’s X icon and click the Submit button.
To create an access profile, click the paper and pencil icon. To modify an access profile, click the access profile’s pencil icon. On the new screen that appears, you can modify the access profile.
Access Profile Name. This is the name of the access profile.
Rule Priority. This is the rule priority. When a packet is matched to a rule, user groups are granted permission or denied access.
Management Method. This is the method for which the access profile is defined.
Interface. This indicates the interface type to which the rule applies.
Source IP Address. This is the interface source IP address to which the rule applies.
•Network Mask. This is the IP subnetwork mask (or subnet mask).
•Prefix Length. This is the number of bits that comprise the source IP address prefix or network mask of the source IP address.
Action. This indicates whether to permit or deny management access per device.
Click the Submit button to save your changes.
Chapter 5: Using the
NOTE: This section does not apply to the SRW2048 Switch. If you have a SRW2048 Switch, refer to the sections titled Security Tab for SRW2048 Switches.
Figure
Figure
51
Security Tab for Other Switches - ACL
