Linksys SRW224G4, SRW248G4, SRW2048, SRW2016 manual Default Parameters

Models: SRW2016 SRW224G4 SRW2048 SRW248G4

1 123
Download 123 pages 42.48 Kb
Page 54
Image 54

WebView Switches

Dead Time (0-2000). Enter the number of minutes that a RADIUS server is bypassed for service requests. To use the default, click the Use Default checkbox.

Key String (0-128 Characters). Enter the pre-shared key in this field. To use the default, click the Use Default checkbox.

Source IP Address. Enter the source IP address used for communication with the RADIUS server. To use the default, click the Use Default checkbox.

Usage Type. This is the RADIUS server authentication. Select Log in if you want the RADIUS server used for authentication of usernames and passwords. Select 802.1x if you want the RADIUS server used for 802.1x authentication. Select All if you want the RADIUS server used for authentication of usernames and passwords, as well as 802.1x authentication.

Default Parameters

Default Retries (1-10). Enter the number of retries allowed before a failure occurs. To use the default, click the

Use Default checkbox.

Default Timeout for Reply (1-30). Enter the default number of seconds the Switch waits for an answer from the

RADIUS server before retrying the query or switching to the next server.

Default Dead Time (0-2000). Enter the default number of minutes that a RADIUS server is bypassed for service requests.

Default Key String (0-128 Characters). Enter the default pre-shared key in this field.

Source IP Address. Enter the default source IP address used for communication with the RADIUS server.

Click the Submit button to save your changes.

Chapter 5: Using the Web-based Utility for Configuration

44

Security Tab - RADIUS Server

Page 54
Image 54
Linksys SRW224G4, SRW248G4, SRW2048, SRW2016 manual Default Parameters