WebView Switches
To add an entry, click the paper and pencil icon. On the new screen that appears, you can configure the following settings:
Alarm Entry. This is the number of the alarm entry.
Interface. Select the interface for which RMON statistics are displayed, either a port or LAG. Then, select the appropriate number from the
Counter Name. Select the MIB (Management Information Base) variable from the
Sample Type. Select the sampling method, Delta, which subtracts the last sampled value from the current value and then compares the difference to the threshold, or Absolute, which compares values directly with the thresholds at the end of the sampling interval.
Rising Threshold. Enter the rising counter value that triggers the rising threshold alarm.
Rising Event. Select how alarms are reported, Log, Trap, or Log and Trap.
Falling Threshold. Enter the falling counter value that triggers the falling threshold alarm.
Falling Event. Select how alarms are reported, Log, Trap, or Log and Trap.
Startup Alarm. Select the trigger that activates the alarm generation.
Interval. Enter the alarm interval, measured in seconds.
Owner. Enter the name of the user who requested this alarm.
Click the Submit button to save your changes.
Chapter 5: Using the
Figure
65
Statistics Tab - RMON Alarms