WebView Switches
Security Tab - Storm Control
The Storm Control screen allows you to enable or disable Storm Control, which limits the number of multicast and broadcast frames accepted and forwarded by the Switch.
Port. Indicates the port on which storm control is enabled.
Enable Broadcast Control. Enables broadcast control on the port.
Broadcast Mode. Specifies the broadcast mode currently enabled on the Switch. These can be:
•Unknown Unicast, Multicast & Broadcast
•Multicast & Broadcast
•Broadcast
Broadcast Rate Threshold. Indicates the maximum rate at which broadcast packets are forwarded.
To modify any of these settings, click the Edit icon, which resembles a pencil, to open the edit screen. T
Click the Submit button to save your changes.
Figure
NOTE: On FE Switches, the storm control cannot be enabled if the bandwidth rate is limited.
Security Tab - Authenticated Users |
|
The Authenticated Users screen shows the user port access lists. |
|
User Name. Use this |
|
Port. This is the port number. |
|
Session Time. This is the number of seconds the user was logged on the port. |
|
Authentication Method. This is the authentication method used during the most recent session. Remote |
|
indicates that the port is forceauthorized. None indicates that no authentication method was used. RADIUS |
|
indicates authentication by a RADIUS server. |
|
MAC Address. Displayed here is the MAC address of the user. | Figure |
| |
Chapter 5: Using the | 45 |
Security Tab - Storm Control