WebView Switches
one or more network layer protocols. When each of the chosen network layer protocols has been configured, packets from each network layer protocol can be sent over the link. The link remains configured for communications until explicit LCP or NCP packets close the link, or until some external event occurs. This is the actual switch port link type. It may differ from the administrative state.
Activate Protocol Migration. When checked, enables PPP sending Link Control Protocol (LCP) packets to configure and test the data link.
To modify the settings on this screen, click the Edit icon, which resembles a pencil, to open the edit screen.
Click the Submit button to save any of your changes on this screen.
Chapter 5: Using the | 91 |
Spanning Tree Tab on SRW2048 Switches - RSTP Interface Settings
