Linksys SRW248G4, SRW2048, SRW224G4, SRW2016 manual Connecting to the Switch through a Telnet Session

WebView Switches

4.Set the serial port settings as follows: Bits per second: 38400

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

Then, click the OK button.

Figure 4-4: COM1 Properties

Connecting to the Switch through a Telnet Session

Open a command line editor and enter telnet 192.168.1.254. Then, press the Enter key.

The Login screen will now appear. The first time you open the CLI interface, select Edit and enter admin in the

User Name field. Leave the Password field blank.

Press the Esc button and you will return to the login screen. Then, select Enter to enter the CLI interface.

Figure 4-5: Telnet Login screen

Chapter 4: Using the Console Interface for Configuration 10

Connecting to the Switch through a Telnet Session