Allied Telesis manual Connecting AT-WR4600 products, Accessing the device via SSH

Connecting AT-WR4600 products

There are two options for accessing the Command Line Interface of the devices:

SSH remote shell, using any text-mode SSH client software.

RS-232 Line Driver/Receiver that provides a standard DTE console interface; note, this is optional and is not always available.

Accessing the device via SSH

The Secure Shell (SSH) is an encrypted networking protocol, allowing the user to configure the device through an Ethernet network. Microsoft does not supply SSH tool. You can use an alternative program such as Tera Term Pro, which is licensed under GPL2. The device is factory configured with the static IP address 192.168.1.1. If the device is receiving an address from a DHCP server, please check the assigned IP address.

Accessing the device via RS-232

To access the device, you can use either the build-in Microsoft HyperTerminal (note it was removed from Windows Vista and later versions) or an alternative program such as Tera Term Pro.

The settings of the serial terminal are as follows.

Transmission rate	115200bps
Data length	8 bit
Stop bit	1bit
Parity	None
Flow control	None

Page 8 How To: Configure the WLAN with QoS alliedtelesis.com