
Chapter 2 Avaya P460 CLI Commands
The syntax for this command is:
set device-mode <mode>
mode | • | Router – switch operates at Layers 2 and 3. |
| • | layer2 – switch operates at Layer 2. |
Example:
P460-1(super)# set device-mode Router
This command will RESET the switch****
Reset **** do you want to continue (Y/N) ?
Done!
You need to install the appropriate license before you can set the device mode to Router.
set device-mode (Layer 3)
User level: read-write, admin.
Use the set
The syntax for this command is:
set
mode | Router Layer2 |
Example:
Router-1> set device-mode Layer2
This command will RESET the device
*** Reset *** - do you want to continue (Y/N)? y
Avaya P460 Reference Guide | 75 |