Chapter 2 Avaya P460 CLI Commands
copy tftp SW_imageA
User level: read-write, admin.
Use the copy tftp SW_imageA command to update the software image in Bank A of all the Supervisor Modules installed in the switch. To use this command, you need to have an active TFTP server, and to create a file into which to download the data. If MSNM is running, an additional tftp server is not required.
copy tftp SW_imageA <filename> <ip>
filename | file name (including full path) |
ip | IP address of the host |
Example: |
|
P460-1# copy tftp SW_imageA c:\imgA.bin 149.49.36.200
Beginning download operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
*********************************************************************
* If you are currently running the P460 Device Manager application, * * it is recommended to exit from it before performing configuration *
* download operations.*
*********************************************************************
copy tftp SW_imageB
User level: read-write, admin.
Use the copy tftp SW_imageB command to updates the software image in Bank B of all the Supervisor Modules installed in the switch. To use this command, you need to have an active TFTP server, and to create a file into which to download the data. If MSNM is running, an additional tftp server is not required.
copy tftp SW_imageB <filename> <ip>
filename | file name (including full path) |
ip | IP address of the host |
26 | Avaya P460 Reference Guide |
