Chapter 2 Avaya P460 CLI Commands
The syntax for this command is:
set port vlan <vlan_num> <module>/<port>
vlan_num | Number identifying the VLAN. |
module | The module number |
port | Number of the port on the module. |
| You can also specify a range of ports separated by a dash, for |
| example, |
Example: |
|
VLAN 2 modified.
VLAN Mod/Ports
----
2 3/5
set port vlan-binding-mode
User level: read-write, admin.
Use the set port
The syntax for this command is:
set port vlan-binding-mode [port_list] [value]
port list | Switches and ports to bundle (format: module/port) |
value | • static - the port supports only the VLAN as configured per |
| port |
| • |
| configured on the device |
| • |
| on the device |
100 | Avaya P460 Reference Guide |