Cambridge SoundWorks P460-1#clear port static-vlan 3/10, Clear radius authentication server

Chapter 2 Avaya P460 CLI Commands

The syntax for this command is:

clear port static-vlan[module/port range][vlan num]

module/port range	Port range
vlan num	The VLAN to unbind from the port
Example:

P460-1#clear port static-vlan 3/10 5

VLAN 5 is unbound from port 3/10

clear radius authentication server

User level: read-write, admin.

Removes a primary or secondary RADIUS authentication server.

The syntax for this command is:

clear radius authentication server[{primarysecondary}]

primary	Remove primary RADIUS server
secondary	Remove secondary RADIUS server
Example:

P460-1(super)#clear radius authentication server secondary

clear snmp trap

User level: read-write, admin.

Use the clear snmp trap command to clear an entry from the SNMP trap receiver table.

The syntax for this command is:

clear snmp trap {<rcvr_addr>all}

rcvr_addr	IP address or IP alias of the trap receiver (the SNMP management
	station) to clear
all	Keyword that specifies every entry in the SNMP trap receiver
	table

20 Avaya P460 Reference Guide