Chapter 2 Avaya P460 CLI Commands

Example:

P460-1>show arp-aging-interval

ARP table aging interval for gateways was set to 10 minutes.

show arp-tx-interval

User level: read-only, read-write, admin.

Use the show arp-tx-intervalcommand to display the keep-alive frames transmission interval.

The syntax for this command is:

show arp-tx-interval

Example:

P460-1>show arp-tx-interval

ARP tx interval for inband interface is set to 5 seconds.

ARP tx interval for outband interface is set to 5 seconds.

show boot bank

User level: read-only, read-write, admin.

Use the show boot bank command to display the system boot bank.

The syntax for this command is:

show boot bank

Example:

P460-1>show boot bank

SPV 1 boot bank is A

SPV 2 boot bank is B

show broadcast storm control

User level: read-only, read-write, admin.

Use the broadcast storm control command to display broadcast storm status and

Avaya P460 Reference Guide

121

Page 131
Image 131
Cambridge SoundWorks P460-1show arp-aging-interval, Show arp-tx-interval, P460-1show arp-tx-interval, Show boot bank