Chapter 2 Avaya P460 CLI Commands
The syntax for this command is:
clear interface [outband inband]
outband | Clears the outband interface |
inband | Disables the inband interface |
Example: |
|
P460-1# clear interface outband
Interface outband Cleared.
You must reset the device in order for the change to take effect.
clear ip route
User level: read-write, admin.
Use the clear ip route command to delete IP routing table entries.
The syntax for this command is:
clear ip route <destination> <mask>
destination | IP address of the network, or specific host to be added |
mask | IP address of the router |
Example: |
|
P460-1# clear ip route 134.12.3.0 255.255.255.0
Route deleted.
clear ip route (Layer 3)
User level: read-write, admin.
You can only access this command in configure mode.
Type configure at the command prompt to enter configure mode.
Use the clear ip route command to delete all the dynamic routing entries from the Routing Table.
18 | Avaya P460 Reference Guide |
