Cambridge SoundWorks P460 manual Username

Chapter 2 Avaya P460 CLI Commands

Use the validate-groupcommand to verify that all the rules in a priority list are valid.

If there is a configuration problem with a specific rule, or with a number of rules, detailed error messages will be given.

The syntax for this command is:

validate-group<policy-list-number>[quiet]

quiet does not display error messages

Example:

Router-1(configure)# validate-group 101

username

User level: admin.

Adds a local user account.

By default there is only a single user account, named 'root', with password 'root', which access the administrator level. You cannot delete this basic user account, nor modify its access level, but can modify its basic password.

The syntax for this command is:

username <name> password <passwd> access-type {read-onlyread- writeadmin}

name	New user name (minimum four characters)
passwd	User’s password (minimum four characters)
access-type	Access type definition - read only, read-write or
	administrator

184 Avaya P460 Reference Guide