Chapter 2 Avaya P460 CLI Commands
allocated for bootp/dhcp requests:
192.168.169.0
Done!
ip bootp-dhcp relay
User level: read-write, admin.
You can only access this command in configure mode.
Type configure at the command prompt to enter configure mode if necessary.
The ip
The no ip
The default state is disabled.
The syntax for this command is:
[no] ip bootp-dhcp relay
Example:
To enable relaying of BOOTP and DHCP requests:
Done!
To disable relaying of bootp and dhcp requests:
Router-1(configure)# no ip bootp-dhcp relay
Done!
ip bootp-dhcp server
User level: read-write, admin.
You can only access this command in Interface mode.
Type interface [name] at the command prompt to enter Interface mode if necessary.
Use the ip
Use the no ip
Avaya P460 Reference Guide | 37 |
